Growler® Cold Air Induction
The standard system draws air through an undersized intake to a small opening in a restrictive airbox that disrupts airflow.
SS Inductions’ Growler® system replaces the factory airbox altogether with a bigger streamlined airbox that is much more efficient. Together with a larger volume of intake air it provides a more direct path to the motor with a smooth undisrupted flow. The kit includes our specially-designed Big Mouth® 9” inverted cone rewashable pod filter with a 5” diameter mouth which has a huge surface area for maximum flow. The Growler® airbox features additional viewing holes which not only allow you to see the condition of the filter for cleaning but also provides extra airflow into the system from around the bonnet area. The factory intake is retained, connecting into the side of the Growler® airbox and secured by a rubber seal.
Expect power gains of up to 18rwkw, increased low down torque, sharper throttle response and improved fuel economy. Plus the growl under heavy acceleration! RRP $599.00.
Part # CAI034.
|
|
Big
Mouth™ CNC Billet Throttle Body
The standard throttle body has a 75mm butterfly and is very restrictive in its design.
The SS Inductions’ Big Mouth® Throttle Body with its 80mm butterfly delivers greater torque and throttle response through the entire rev range. Features radiused throttle shaft and non-protruding screws for smoother airflow. Expect an increase of up to 10kW at the rear wheels.
The Big Mouth® Throttle Body is factory-assembled with bearings, streamlined shaft, butterfly and gears. Fitting is simple and full instructions are supplied. Easily put back to standard if required. RRP $725.00.
Part # PTB010
|
|
Big Mouth® CNC Billet Throttle Body with High Velocity Vortex Channels
The standard throttle body has a 75mm butterfly and is very restrictive in its design.
The SS Inductions' Big Mouth® Throttle Body with its 80mm butterfly and exclusive High Velocity Vortex Channels delivers sharper throttle response and increased power, with a massive improvement in mid-range torque and induction roar. Features radiused throttle shaft and non-protruding screws for smoother airflow.
The throttle body is factory-assembled with bearings, streamlined shaft, butterfly and gears. Fitting is simple and full instructions are supplied.
Easily put back to standard if required. RRP $825.00.
Part # PTB012
|
|
Big Mouth® CNC Billet Vortex Spacer
The standard throttle body has a 75mm butterfly.
The 75mm SS Inductions’ Big Mouth® Spacer with the unique Vortex channels is designed specifically to fit the XR8 model with the standard throttle body. The increased flow and speed of air to the manifold delivers a better air/fuel mixture to improve throttle response with more mid-range power and torque.
Extremely easy to install with full instructions supplied. RRP $285.00.
Part # TBS001
|
|
Big Mouth® Cold Air Induction
The Big Mouth® induction consists of an air dam that sits behind the grille which captures and directs high pressure air into the factory intake. The kit includes an intake cover that minimises air pressure loss. As the unit uses the factory airbox and the air dam is fitted behind the grille it retains the factory look.
This low cost entry level cold air induction may be used on its own or in conjunction with the premium Growler® airbox.
Expect power gains of up to 8rwkw for the 6cyl and up to 18rwkw when used in conjunction with the Growler® on turbo and V8 models, plus increased torque and better fuel economy.
Kits are available with or without a Big Mouth® high performance rewashable panel filter (to suit factory airbox) - note that the panel filter is not required if the Growler® airbox is fitted.
RRP $110.00 (induction only) and $220.00 (induction and panel filter).
Part # CAI033 (Induction only, FG V8 range)
Part # CAI037 (Induction and Filter, FG V8 range)
|
|
Engine
Covers
The three-part engine cover to enhance the XR8 motor are made from high-heat plastic and feature protective heat shield and bracing. Available in black (textured finish) or colour-coded (smooth gloss finish) to match your car. Note that the kit also includes the black Computer Cover. RRP from $399.00.
Part # ECK001 (black textured)
Part # ECK002+ (colour-coded smooth)
|
|
Computer
Cover
This stylish black plastic cover fits over the computer housing to enhance the under-bonnet appearance. RRP $75.00.
Part # CPC001’
|
|
