Big
Mouth™
Cold Air Induction
The standard system is at least 4 times smaller
with very restrictive access to the airbox.
SS Inductions’ Big Mouth™ system channels
air from the front of the moving car and rams it
through the induction directly to the larger intake
connected to the standard airbox. The opening in
the lower airbox must be enlarged as part of the
fitting process.
The ramming effect is increased at highway speed
by two of the unique SS Inductions’ aluminium
air scoops, ensuring maximum delivery of cold air
to the motor from the grill area.
Expect up to 8kw increase at the rear wheels, smoother
performance, more responsive throttle and a considerable
fuel saving.
The four-part kit consists of plastic induction
unit, plastic connecting intake and two of the unique
SS Inductions’ aluminium air scoops. RRP $399.00.
Part # CAI020
|
|
Growler® Cold Air Induction
The GROWLER® system replaces the factory airbox altogether and is designed to maximize air flow and to provide a shorter path to the throttle body. This delivers a much faster and smoother flow than the standard air box and makes use of our superior Big Mouth® inverted cone high performance filter. The factory induction can also be connected to the Growler®. A unique SS Inductions' aluminium air scoop is included as part of the kit to increase the ramming effect at highway speed through the opening of the factory induction. A special cap is provided for use when the factory induction is not required.
With a great induction growl, expect to gain up to 16kw at the rear wheels (turbo models), significantly increased torque and throttle response and better fuel economy.
The five-part kit consists of plastic pod-style airbox with lid, the Big Mouth® pod filter, standard induction cap and the unique SS Inductions' aluminium air scoop. RRP $599.00.
Part # CAI024
|
|
Big
Mouth™ High Performance Filter
Manufactured by Kingdragon®, Italy. These long-life
washable filters have superior airflow and maximum
filtration. RRP $125.00.
Part # PAF006
|
|
Big
Mouth™ CNC Billet Throttle Body
The standard throttle body has a 70mm butterfly
and is very restrictive.
The SS Inductions’ Big Mouth™ Throttle
Body with its 75mm butterfly delivers greater torque
and throttle response through the entire rev range.
Expect an increase of up to 8kW at the rear wheels.
The Big Mouth™ Throttle Body is factory-assembled
with bearings, streamlined shaft, butterfly and
gears. Fitting is simple and full instructions are
supplied. Easily put back to standard if required.
Available in Billet for RRP $725.00.
Part # PTB014
|
|
Computer Cover
This stylish black plastic cover
fits over the computer housing to enhance the under-bonnet
appearance. RRP $60.00.
Part # CPC001
|
|
Gauge Holder
This great looking plastic gauge
holder is designed to hold two standard sized gauges
(2 1/16” or 2 5/8”) and is mounted on
the top of the centre dash, pointing toward the
driver. It is available in a black textured or smooth
finish, or smooth painted gunmetal grey. RRP from
$75.00.
Part # DGH001 (black textured)
Part # DGH002 (black smooth)
Part # DGH003 (gunmetal grey smooth)
|
|
Air Deflector Fins
These Air Deflector Fins adhere to the top of the rear window (sedan only) to give a great sporty look and reduce drag & turbulence at the rear of the vehicle.
As a vehicle moves forward the air flowing over the roof becomes separated and turbulent, creating drag. The Air Deflector Fins create a series of vortices smoothing out the airflow and causing it to stick to the back of the vehicle, reducing the total drag. The rear window is left cleaner and drier in wet conditions as there is no longer a vacuum pulling in dirt and water, meaning you have better visibility and clearer rear vision!
Manufactured from high grade black ABS plastic in a smooth or textured finish, these Air Deflector Fins may be painted to match your vehicle or left as is. RRP $169.00
Part # ADF001 (smooth)
Part # ADF002 (textured)
|
|
